Achieve your targets with the right additives
TERRA offers a high quality product range of synthetic silica powders which consists of precipitated and fumed types silica powders with hydrophilic and hydrophobic character.
These synthetic amorphous silica powders are of exceptional purity, non-toxic, chemically inert and does not conduct either electricity or heat. They benefit to many different applications, including all types of fine powders for flow imprevement, defoamers and antfoams for rapid foam destruction, printing offset inks for preventing misting and setoff, silicone rubber compounds for viscosity adjustment and mechanical reinforcement.
Significant improvements
The high-quality synthetic silica powders from TERRA deliver significant improvements in product formulations regarding:
> Adhesion Promotion
> Antiblocking
> Agglomeration
> Controlled release
> Carrier
> Rheology control, flow improvement and viscosity adjustment
> Rapid foam destruction (after in-situ hydrophobization)
> Improvement in printing quality (preventing misting and setoff in printing and offset inks)
> Mechanical interaction
> Several special functions in thermoplastics
> Surface effects (Anti-static, anti-corrosive, scratch resstance)
> Reinforcement (Mechanical, thermal, chemical and electrical)
> Whitening
Consistent quality
The silica powders of high purity from TERRA are ideal to improve the product performances in terms of mechanical strengths, thermal and chemical stability, resistance to salts, acids and alkalis, protection against extreme conditions, and weathering, thermal insulation, and dielectric strength. They are also used for rheology control, and adjust flow property of powders or liquid systems as targeted.
For further information about our range of Silica, please contact us. Our experts will assist you in making the right choices to secure the product properties you seek.
PRODUCT RECOMMENDATIONS
TERRASIL® 1100 SILICA
Hydrophobic Precipitated Silica
(CAS No. 67762-90-7)
Hydrophobized milled precipitated silica powder with particle size distribution between 4,5 and 8,5 µm. Its key effect is defoamer booster. It is heavily used in defoamer and antifoam formulations.
TERRASIL® 1300 SILICA
Hydrophobic Precipitated Silica
(CAS No. 67762-90-7)
Hydrophobized milled precipitated silica powder with particle size distribution between 8,5 and 12,5 µm. Its key effect is defoamer booster. It is heavily used in defoamer and antifoam formulations.
TERRASIL® 3200 SILICA
Hydrophilic Precipitated Silica
(CAS No. 112926-00-8)
Hydrophilic milled precipitated silica powder with BET surface area 160-200 m²/g, and particle size distribution between 5,5 and 9,5 µm. Its key effect is carrier. It is heavily used in defoamer and antifoam formulations.
HDK® H15
Pyrogenic Silica
(CAS No. 68611-44-9)
Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. HDK® H15 is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. HDK® H15 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 acts as a free flow additive in the production of technical powders. HDK® H15 is not suitable for pharmaceuticals, food and feed.
HDK® H17
Pyrogenic Silica
(CAS No. 67762-90-7)
Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. HDK® H17 is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems.
HDK® H18
Pyrogenic Silica
(CAS No. 67762-90-7)
Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. HDK® H18 is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems.
HDK® H20
Hydrophobic Pyrogenic Silica (INCI Name: Silica Dimethyl Silylate)
(CAS No. 68611-44-9)
Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. HDK® H20 is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. HDK® H20 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. HDK® H20 is not suitable for pharmaceuticals, food and feed.
HDK® N20
Pyrogenic Silica (INCI Name: Silica)
(CAS No. 112945-52-5)
Synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. HDK® N20 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 acts as a free flow additive in the production of technical powders.
APPLICATIONS
> Additives for Rheology Control
> Adhesives & Sealants
> Anti-Corrosive Coatings
> Architectural Coatings
> Automotive Coatings
> Can Coatings
> Coil Coatings
> Composites
> Flexographic Printing
> Gravure Printing
> Industrial Coatings
> Industrial Wood Coatings
> Inkjet Paper
> Make-up
> Marine & Protective Coatings
> Offset Printing
> Oral Care
> Personal Care
> Powder Coatings
> Rheology Control
> Rheology Control & Free-Flow Agent
> Rheology Control
> Rheology Modifiers
> Roof Coatings
> Screen Printing
> Skin Care
> Structural Bonding of Wind Turbines
> Sunscreen
> Wind Energy
> Wood-to-Wood Bonding